Toyota bZ4X home charger: charge time and which amps it can use

Charge time by charger amps

A charger's amp rating sets its power on a 240 volt circuit; the car then takes the smaller of that and its own onboard limit. Each row is one standard charger rating.

Power is amps times 240 volts. Full-charge times divide the EPA wall energy for a full charge (71 to 73 kWh), which already includes charging losses, by the rate the car accepts. The comparison column reads the highest-rated trim. The last column counts chargers in this database rated at exactly that current that plug into this car directly.

How these Level 2 times compare with a standard 120 volt outlet, in hours to full and miles added overnight for every vehicle family, is in Level 1 vs Level 2 charging compared by vehicle.

Chargers that fit the Toyota bZ4X, by amps

Selection rule, in full: only chargers with a verified price appear; grouped by the charger's rated current; the 5 lowest verified prices in each group. Nothing here is an editorial pick.

Prices were verified at a named seller on October 5, 2026. Rate and full charge assume the 7.6 kW onboard charger; lower-rated trims cap lower, as the table above shows.

See all 180 chargers that fit this vehicle

Charge rate depends on which Toyota bZ4X you have

This family does not charge at one speed. 2 different AC intake ratings ship across the 8 trims, and a charger cannot exceed the one in your car. Buying for the higher figure when you own the lower trim buys nothing.

Intake figures are manufacturer-published, not derived from EPA data. Source: the maker's own documentation. Full-charge times assume 71 to 73 kWh drawn from the wall, which already includes charging losses.

What a full charge costs

Electricity is the whole running cost, and it is the number that varies most by where you live. A full 71 to 73 kWh at the Toyota bZ4X, priced three ways:

Rates are the EIA residential series, July 2026. Your own utility and any time-of-use plan decide the real figure.

Work it out for your own state with the charging cost calculator.

The circuit this car needs

A home charger is a continuous load, so the National Electrical Code sizes both the breaker and the conductor at 125 percent of its draw. A charger matched to this car's 7.6 kW ceiling pulls 32 amps at 240 volts, which needs a 40 amp circuit rather than the 32 amp one the arithmetic alone suggests. That gap is where most installation quotes go wrong.

Of the 180 chargers that plug in directly here, 161 meet or beat the car's ceiling. Going above it changes nothing for this vehicle, though it leaves headroom for a future one that draws more.